Skip to main content

Try the sample plan and the First steps card

How to open the sample plan prepared with Örnek Teknoloji A.Ş. data to try Workforce Cost Forecast without your own data, what you can see in the read only sample, how to copy it and try it as your own draft, the First steps card and the sample plan…

This article explains how to try the Workforce Cost Forecast module without using your own data. Everyone who can open the module sees the sample plan; people with the Workforce Cost Forecast Admin Permission or the Workforce Cost Forecast Manager Permission can copy it.

The sample plan is a calculated 2027 budget of a fictitious company (Örnek Teknoloji A.Ş.) with 40 employees. Opening it changes no data in Teamso and runs no calculation; its report was calculated in advance.

Before you start

  • The Workforce Cost Forecast package is on for your company and you have one of the module's permissions (Workforce Cost Forecast overview).

  • The Sample plan setting is on for your company (it is on by default).

Step by step

Open the sample plan

  1. In the left menu, open Pay and expenses > Workforce Cost Forecast > Budget plans. If you have no plans yet, the start page shows Look at a sample budget first next to Prepare my budget.

    Start page without plans and the Look at a sample budget first button
  2. Click Look at a sample budget first. The sample plan opens on the Report step within a few seconds.

  3. You can also start from the module introduction: in Configuration > Company settings > Modules (or Discover in the left menu if you signed up yourself), the Try the sample plan button on the Workforce Cost Forecast card turns the module on first if it is off, then takes you to the sample plan.

Move around the sample plan

  1. A Sample plan. band is shown above every step and a Sample data badge next to the plan switcher.

    Report of the sample plan with the Sample plan band and the Sample data badge
  2. Move between the steps with Back and Next or from the step strip. Employees, timesheet, expense and increase scenarios, parameters and the report are shown but cannot be changed.

  3. On the Report step the KPI cards, charts, highlights, the cost bridge, What changed (the difference between two calculations), "How was this number calculated?", Design report, Download Excel and Download slides work.

  4. Comments, version history, sending for approval, sharing, the e-mail summary, the contribution round, comparison, Ask the budget, the executive summary and the accounting report are not available in the sample plan. Copy the sample to try them.

Copy it and try it as your own plan

  1. Click Copy and try in the band. In the Copy plan dialog the name is "Sample plan (copy)"; change the name and the period if you like.

    Copying the sample plan
  2. Click Copy. The copy opens on the Start step as an ordinary draft plan of your company: you can change every value, add scenarios and recalculate with Calculate.

  3. To start with your own data, click Start with my data in the band; the New budget plan dialog opens (Create a budget plan).

The First steps card

  1. For people who can open plans, a First steps card is shown on the right of the Start and import steps (without a plan the start page shows the simpler Your first budget in 3 steps card instead). It has six items: Create your plan, Check your data, Add a raise scenario, Create the report, Compare a scenario, Share with your team.

  2. Items are ticked by themselves from what you do in your own plans: when you open or copy a plan, open the Employee details step, save a change on the Increases step, your plan is calculated, you compare two plans and you share a plan. Moving around the sample plan does not tick items.

  3. Clicking an item takes you to the matching step, the comparison or the share dialog.

  4. Collapse shrinks the card to its progress bar, Expand opens it again. The X closes the card; open it again with More > Show first steps. This choice is personal.

  5. Start the app tour at the bottom of the card opens the 10 step app tour; the card is hidden while the tour is open. While the card is on screen, the tour does not open by itself (Workforce Cost Forecast module overview).

The sample plan setting

  1. On Workforce Cost Forecast > Settings, the switch of the Sample plan row decides whether people who open the module for the first time can try the sample plan. A module admin changes this setting.

    The Sample plan row in the settings
  2. Turn the switch off and click Save. The Look at a sample budget first button no longer appears on the start page.

Result

The sample plan is prepared once for your company and everyone sees the same sample. It is not in the plan list, counts, the approved budget, e-mail summaries or AI tools, and it is never compared with your data in Teamso. Its copy is an ordinary draft plan of your company and payroll is calculated as usual.

Common problems

Symptom: There is no Look at a sample budget first button on the start page.
​Cause: The Sample plan setting is off for your company, or your company already has budget plans (the start page then opens your last plan). Ask your module admin to turn the setting on, or go to the sample plan from the card in Configuration > Company settings > Modules.

Symptom: Changing a value in the sample plan shows "The sample plan cannot be changed; copy it and try it as your own plan."
​Cause: The sample plan is read only. Open your own copy with Copy and try.

Symptom: The Copy and try button is not shown.
​Cause: People with the viewer permission cannot open plans, so they cannot copy the sample.

Did this answer your question?