This article explains how to compare your budget plans and see why the cost changed. The Comparison screen puts two to four plans side by side: total costs and the difference, the monthly cost lines, a breakdown by branch, department or position, and the input differences between the plans. With Derive scenario you open a copy of a plan with one change and compare it right away. The Cost bridge and What changed cards in the Chart view of the report show the reasons behind the cost.
Before you start
The plans you compare have a report (Creating and recalculating the budget report). A plan without a report keeps its place in the comparison but is not in the numbers.
Everyone who can open a plan sees the comparison. Amounts of employees from Teamso need the salary viewing permission; a person with Workforce Cost Forecast Manager sees only the employees of their branches, and the totals follow.
Derive scenario needs the right to copy the plan: Workforce Cost Forecast Admin or Workforce Cost Forecast Manager.
Step by step
Open the comparison: Workforce Cost Forecast > Comparison in the menu, or More > Compare inside a plan, or Compare at the bottom of the plan selector. The page lists the plans you can see as cards: each card shows the name, the period, the status (Calculated, Out of date, Not calculated or Calculating), the total cost and the last calculation date. The What the comparison shows box on the right sums up in three points what you will see.
Click two to four cards. The chosen cards line up in To compare at the top in letter order (A, B, C, D); the first one you choose is the Reference. Click a card again or use the cross in the area to remove it. With only two plans both come chosen; when you came from inside a plan, that plan is chosen. Then press Compare. While fewer than two plans are chosen the button is disabled and says Choose one more plan.
Once the comparison is open every plan shows its letter and colour in the row at the top. The differences are against the reference. Add up to four plans with Add plan, remove one with the cross next to it. Include expenses shows the totals with or without expenses. When you came with one plan, the goal budget solver and the sensitivity analysis of that plan are below (Goal budget solver and sensitivity analysis).
Read the total cost cards: each plan's total and its difference to the reference (amount and percent). A red difference is a cost increase, a green one a decrease.
In Monthly total cost every plan is a line. For plans with a different period the months outside it stay empty.
In Breakdown choose Department, Branch or Position. Every row shows the plans' totals and a Difference column; with more plans there is one difference column per plan (Difference: B).
Why they differ: input differences compares the inputs of two plans in plain sentences, for example January 2027 raise is 25% in B, 30% in A. Period, employee counts, planned hires and exits, increases, timesheet rows, expenses, legal parameters and exchange rates are compared. Rows of a single employee are only counted; no name or amount is shown.
Download the comparison with Excel file and PDF file. The Excel file has the sheets Summary, Monthly cost, By branch, By department, By position and Input differences; the PDF has the totals, the monthly chart and table, the department breakdown and the input differences. The numbers are the same as on the screen.
To try a new scenario press Derive scenario. With several plans choose which one to derive from, then pick one change: Lower the raise by 5 points, Postpone hires by 3 months, Raise exchange rates by 10% or Custom. You can change the amount in the field next to the option. When the plan has nothing to change (no percentage raise, no planned hire or no exchange rate) the option is disabled and says why.
Check the New plan name and press Derive and compare. The copy opens with the change, its calculation starts and it is added to the comparison; the numbers arrive when the calculation is done. With Custom, Derive and open opens the copy and you make the change yourself.
To see the reasons behind the cost, go to the Chart view of the plan's Report step. In the Cost bridge card press Calculate the bridge. The bridge calculates the plan six times, adding one driver at a time; it can take a few minutes and you may leave the page.
Read the bridge: Start (first month cost x 12 months), then Raises, New hires, Exits, Benefits and bonuses, Legislation, Exchange rates, Expenses and the End total. An orange bar is an increase, a green bar a decrease. The drivers add up to the end minus the start, to the kuruş. The ⓘ icon explains the effect of the order.
In the same view the What changed card compares the plan's previous and latest calculation: the two totals and the Difference, the Employees who changed most (at most 10) and the Inputs behind the change (who changed what, when). Open version history shows every change.
Rules and limits
A comparison has at least two and at most four plans. For a plan you cannot open (deleted, archived or not shared with you) it only says This plan cannot be opened; its name and numbers are not shown.
A plan being calculated shows Calculating. It joins the comparison when done.; the page refreshes every few seconds.
Totals follow the report's rules: summed from unrounded values and rounded to two decimals at the end. Only employees you may see are in the totals, and a note says so.
The order of the bridge is fixed: raises, new hires, exits, benefits and bonuses, legislation, exchange rates, expenses. The order can shift the drivers' shares slightly; the total stays the same. The start is the first month cost of today's people without raises or benefits, times the month count; the difference from net paid employees moving into higher tax bands during the year is part of Legislation.
The bridge belongs to the report's last calculation. When the report is not current recalculate it first; after a new calculation the card says This bridge belongs to an earlier calculation and shows Calculate again.
The What changed card shows when the plan has at least two calculations.
Common mistakes and FAQ
Instead of Compare it says "A comparison needs at least two plans": You can see fewer than two plans. Pick one of the paths on the card: Copy this plan and add a raise opens the copy in the Increases step; Derive a scenario opens a copy with one change and compares both right away; Create a new plan sets up a new plan; Try the sample plan opens the module in a sample plan with ready data. If you may only view plans, ask the owner to share them with you.
No numbers in the comparison: At least two plans need a report. Create the missing report with Open report next to the plan.
Derive scenario, Excel and PDF are not shown: These buttons show while a comparison is open (and Derive scenario when you came with one plan). If Derive scenario is disabled you may not copy the plan, or no plan in the comparison can be opened.
Calculate the bridge does nothing: The report is not current or the bridge is already running. Recalculate the report, then try again.
A single employee's raise is not in the input differences: Rows of one employee are only counted (Employee specific increases in B: 2, in A: 1.).






